What do you need before you start?
You need four things: access to your game in Steamworks, a Steam account that meets Valve's streaming rules, a machine or service that can send RTMP, and a store page to stream to. In detail:
- Steamworks access to the game, with enough rights to edit the store page or create events. That is where the streaming account gets approved.
- A non-limited Steam account to stream from. It must have spent at least 5 USD on the Steam store, own the game, and have either the Broadcast Live permission in your Steamworks partner account or membership of the Store Broadcast Beta group. The requirements guide explains each rule and how to check it.
- An RTMP encoder: OBS, Streamlabs, vMix, a hardware encoder or a hosted service. Steam supports any software that streams over RTMP.
- A store page. Released games qualify, and so do unreleased games that have a Coming Soon page and are planned for release on Steam. Games marked Adult Only cannot be streamed to the store.
Who does what in a store page broadcast?
Four parties are involved, and most failed setups come from mixing up the first two: your Steamworks partner account approves, the streaming Steam account holds the token and App ID, the encoder sends video, and Steam decides whether to show it.
Should you stream from a dedicated Steam account or your own?
Use a dedicated account if anyone on your team will play games on Steam while the broadcast runs; use your own account only for short, supervised streams. The reason is a rule in Valve's demo guide that applies to every broadcast: when an account is playing a game from its Steam library, the broadcast system prefers that game's App ID over the Broadcast App ID you configured. If you stream from your personal account and launch something else in the evening, the stream is relabelled as that game and drops off your store page.
| Question | Dedicated streaming account | Your own account |
|---|---|---|
| Meeting the 5 USD rule | Someone has to spend at least 5 USD on the Steam store from it | Usually already met |
| Owning the game | Add it to your Steamworks partner group with access to the game, or give it a license (key or purchase, or a release override license if unreleased) | Usually already has access as a partner group member |
| Library App ID override | No risk as long as nobody plays games on it | Any game you launch replaces your store page App ID |
| Token exposure | A leaked token only affects the streaming account | A leaked token lets someone stream as you |
| Event approval | Must be on the Steam friends list of the account that sets up the event | Same rule, easy if you set up the event yourself |
| Moderators | Moderators you pick from its friends list apply to all its broadcasts | Your personal friends list moderators apply to your store page stream too |
Teams that stream often, or that hand the stream to a community manager or a hosted service, usually end up with a dedicated account. It is also the cleaner choice when someone else holds the token, because the token is effectively the account's broadcasting password.
How do I set up a Steam broadcast for my store page?
Work through these nine steps in order. Each one depends on the one before: the token needs the App ID, the store page needs the approval, and the approval only matters once the stream is Public.
- Prepare the streaming account Log in to the Steam client with the account you will stream from and confirm your game appears in its library. Check that the account has spent at least 5 USD on the Steam store (limited accounts cannot create an RTMP token). It also needs the Broadcast Live permission in your Steamworks partner account or is a member of the Store Broadcast Beta group.
- Choose which account streams Decide between a dedicated streaming account and your own, using the table above. If anyone will play other Steam games on that account during the broadcast, use a dedicated one, because a game running from the library overrides the Broadcast App ID.
- Set the Broadcast App ID Still logged in as the streaming account, open steamcommunity.com/broadcast/upload and enter your game's App ID. You find it in the URL of your store page or on the app landing page in Steamworks. Use the base game's App ID only, never the ID of a demo, DLC or soundtrack.
- Create the RTMP token On the same page, click Create RTMP Token. Steam picks an upload server near you from your IP address and shows it with the token. Copy both. Treat the token like a password; you can invalidate it and generate a new one there if it leaks. More on finding, regenerating and pasting it in the Steam stream key guide. If you set the App ID after creating the token, regenerate the token.
- Set up the encoder In OBS, open File, Settings, Stream, choose Custom..., paste the upload server into Server and the token into Stream Key. Under Output, switch to Advanced and set Keyframe Interval to 2 (one full frame every 2 seconds); without it the stream fails to start. Use H.264 High, level 4.1, CBR (constant bitrate) up to 7000 kbps and AAC-LC up to 128 kbps. The full values for each app are in the Steam broadcast settings guide, and the click-by-click setup is in how to stream to Steam with OBS.
- Test with Friends Only Leave the broadcast permission on the upload page at its default, Friends Only, and start streaming. Open Your broadcast URL under Quick Links on the upload page and confirm you see and hear the game. Let it run for 10 minutes and check the broadcast history for one clean upload session with no error conditions. A Friends Only stream never appears on the store page, so this step only proves the encoder side.
- Approve the account for your store page In Steamworks, create a Steam event of type Live-Stream/Broadcast, open its Broadcasting tab, enable broadcasting and add the streaming account; the account setting this up and the streaming account must be Steam friends. Check the start and end time on the Options tab, then save and publish. The alternative is adding the account to the whitelist in the Steam Broadcast (Beta) section of the Special Settings tab under Edit Store Page. The next section explains when to use which.
- Switch to Public On the upload page, change the broadcast permission from Friends Only to Public. Only public streams can appear on a store page.
- Go live and verify on the store page Start the stream during the event window (or any time, with the Special Settings whitelist) and wait up to 5 minutes. Then load your store page in a browser where you are logged out, or logged in as a different account, and refresh it. Steam only shows the player once it has a connection to your stream, and the first viewers take the longest to connect.
Order matters for the token. Valve's troubleshooting note says that if the App ID was missing, the store page will not show the stream until you enter the App ID, regenerate the token and paste the new token into your encoder. Setting the App ID first (step 3) and creating the token second (step 4) avoids that loop.
Should I approve the account with an event or with Special Settings?
Valve calls the event method the preferred one. The event's start and end time limit how long the stream can show on the store page, the event gives viewers context, and followers can sign up to be notified when it starts. The Special Settings whitelist is the standing option: the account stays approved until you remove it and publish the store page again.
| Live-Stream/Broadcast event | Special Settings whitelist | |
|---|---|---|
| Where | App landing page, Post/Manage Events & Announcements, new event, Broadcasting tab | App landing page, Edit Store Page, Special Settings tab, Steam Broadcast (Beta) section |
| How long the account may stream to the page | During the event, and up to 24 hours past its end time | Until you remove it and re-publish the store page |
| Extras | Custom or preset title, optional artwork on both sides of the player, follower notifications | None |
| Friends requirement | Setup account and streaming account must be Steam friends | Not stated in the docs |
| Use it for | A scheduled stream: a launch, an update, a dev Q&A | A recurring or open-ended stream where you do not want to create an event each time |
Events go through Steam's event review before they are visible. Developers report events that stayed in review for days and missed their stream, so publish the event well ahead of the start time. If you need the stream on the page without waiting, the whitelist does not depend on an event.
Checklist before you go live
Run down this table with the streaming account logged in on the upload page and Steamworks open in another tab. Every row must be a yes for the stream to reach the store page.
| Check | Where to look | Correct state |
|---|---|---|
| Account not limited | Upload page | You were able to create an RTMP token |
| Game owned | Steam client library of the streaming account | The base game is listed |
| Broadcast App ID | Upload page | Base game App ID, the number in your store page URL |
| Token current | Encoder stream key | Matches the token on the upload page, created after the App ID was set |
| Keyframe interval | Encoder output settings | 2 seconds (GOP 60 at 30 fps, 120 at 60 fps) |
| Rate control and bitrate | Encoder output settings | CBR, at or under 7000 kbps video and 128 kbps audio |
| Friends Only test | Your broadcast URL and broadcast history | Picture and sound play; one clean upload session |
| Approval | Event Broadcasting tab or Special Settings | Streaming account listed; event published and within its time window |
| Friends link | Steam friends list | Event creator and streaming account are friends |
| Permission | Upload page | Public |
| No other game running | Steam client on any PC logged in as the streaming account | Not playing anything from its library |
How do I know the broadcast is showing on my store page?
Open the store page logged out (or in a private window) about 5 minutes after the stream starts and refresh: a live player on the page means it worked. Valve gives up to 5 minutes before the store page picks up a new stream, which is why it suggests starting a few minutes before an announced time.
If the player does not appear after 5 minutes and a refresh, look at the upload page and the history page before changing anything. If Your broadcast URL plays the stream, the encoder side is fine and the cause is on the page side: the account is not approved, the event is not live yet, the permission is still Friends Only, or the App ID is wrong. A missing game capsule on the history page means the App ID was not set for that session. The not showing on the store page guide walks through each cause. If the encoder itself keeps disconnecting, start with Steam broadcast not working instead.
Once it runs, you can promote moderators from chat, mute or remove messages and read viewer numbers on the history page for 30 days. That side is covered in the moderators, chat and stats guide.
Can I stream to Steam without running OBS myself?
Yes. Steam accepts any RTMP source that meets its encoding spec, so you can use different desktop software, a cloud studio, or a service that streams a video file from its own servers. Valve's FAQ allows pre-recorded broadcasts, as long as footage that was previously live is labelled as a replay. These are the common options, each with one real strength and one real limitation:
- OBS Studio: free and open source, and the tool Valve uses in its own setup guide. You run it on your own machine, so the stream stops when that machine sleeps or restarts.
- Streamlabs Desktop: built on OBS with a friendlier interface. Steam is not one of its native platforms, so you use a custom ingest, and Streamlabs says its chat dock, alerts and widgets do not work for custom platforms.
- vMix: professional live production with many inputs, from 60 USD for the Basic HD licence. Valve warns it defaults to Main profile and level 3.0, which you must change to High and 4.1 for Steam.
- Restream: named in Valve's docs and has a Steam channel option, so one OBS output can go to Steam and other platforms at once. It is a monthly subscription for anything beyond the free plan (2 channels), and its unified chat does not include Steam chat.
- LiveU Studio (formerly easylive.io): a browser production studio with graphics and remote guests, also named in Valve's docs, with a Steam guide that lists the full spec. It publishes no prices; you go through a trial and sales.
- Loopcast: built for Steam store pages. You upload a trailer or gameplay video once and it keeps it live on Steam from its servers, so your PC can stay off. Loopcast encodes it to Steam's spec (1080p30, H.264 High 4.1, 2 second keyframes) and restarts the stream by itself if it drops. The first 7 days are free with no credit card (with a watermark). It is pre-recorded only, so no live gameplay or webcam.
- RoboStreamer: a Steam-specific service that streams an uploaded video to one or more Steam pages, with free starting hours. It only does Steam, and support comes from a solo developer by Discord or email.
Whatever you choose, the Steam side does not change: the service only receives the upload server and the token, so the account rules, the App ID, the approval and the Public setting are still yours to get right. Check that the tool lets you set a 2 second keyframe interval and constant bitrate before you rely on it. Prices, plans and limits for each are compared in software to broadcast to Steam.
How do I start a Steam broadcast as a player?
As a player, you start a broadcast from the Steam client itself: its built-in broadcasting streams whatever game the account is currently playing, with no RTMP token, encoder or Steamworks approval involved. A store page broadcast is the developer path on this page, where you choose the App ID, send the stream from external software and approve the account for your game. The broadcasting versus Remote Play explainer sorts out which client feature does what, and how to turn off Steam broadcasting covers its settings.
Questions about broadcasting on a Steam store page
Do I need a Steam event to broadcast on my store page?
No. The event is Valve's preferred way to approve a streaming account, but you can also add the account to the Steam Broadcast (Beta) whitelist on the Special Settings tab of Edit Store Page. One of the two is required.
Can I test my store page broadcast with Friends Only?
No. Only public streams appear on the store page. Friends Only is for checking the stream itself through Your broadcast URL on the upload page.
How long does it take for the broadcast to appear on the store page?
Up to 5 minutes after you start streaming, according to Valve. Refresh the store page after that; the first viewers take the longest to connect.
Can I broadcast a game that is not released yet?
Yes, if you plan to release it on Steam and it has a Coming Soon page. The streaming account still needs access to the game, for example through your partner group or a release override license.
Does Steam record my broadcast?
No. Steam does not save live streams. Record locally in your encoder if you want to keep the footage.
Is broadcasting on the store page free?
Yes. Valve describes broadcasting as a complimentary service available to all partners at no extra cost. You only pay for any third-party software or service you use to send the stream.
Sources
- Steamworks: Setting up a stream (requirements, token, App ID, permissions, OBS, events, 5 minute delay, specs, multistreaming services)
- Steamworks: Livestreaming FAQ (event versus Special Settings, Friends Only, unreleased games, pre-recorded content)
- Steamworks: Livestreaming a game demo (library App ID override, account license options)
- Steamworks: Broadcast viewership statistics (history page, missing capsule)
- Steamworks: Livestreaming overview (no cost to partners)
- Vendor pages for the tools listed, checked 24 October 2026: obsproject.com, streamlabs.com custom ingest article, vmix.com/purchase, restream.io pricing and Steam help article, LiveU Studio Steam article, loopcast.io, robostreamer.com.