steamstreamer
  1. AccountWho may stream
  2. EncoderOBS or another app
  3. RTMP ingestToken and upload server
  4. Store pageApp ID, approval, event

Guides / Settings

Steam broadcast settings that Steam accepts

Steam checks your stream against a short list of encoder values: H.264 High profile at level 4.1, 30 or 60 fps, 16:9, a keyframe every 2 seconds, constant bitrate up to 7000 kbps, and AAC-LC audio up to 128 kbps. Below is what each value means, where it lives in OBS, Streamlabs and vMix, and the resolution and bitrate pairs we test-encoded against those limits.

The settings at a glance

This is Valve's published spec for streams sent to Steam from external software, plus our recommended value for each line. Steam's own column is the rule; the recommendation is what we would type in on a typical home connection.

SettingSteam requiresWe recommend
Video codecH.264H.264 (x264, NVENC, AMF or Quick Sync all produce it)
ProfileHighHigh
Level4.14.1, which limits 1080p to 30 fps (see below)
Frame rate30 or 60 fps60 at 720p, or 30 at 1080p
Aspect ratio16:91280x720 or 1920x1080
Keyframe interval2 seconds2 seconds, never 0 or auto
Rate controlCBRCBR
Video bitrate7000 kbps maximum4500 kbps at 720p60, 6000 kbps at 1080p30
Audio codecAAC-LCAAC-LC, stereo
Audio bitrate128 kbps maximum128 kbps

Valve says these specs are required for now, and that stuttering, pausing or broken playback usually traces back to one of them. If your stream misbehaves, compare it line by line with this table before anything else. The troubleshooting guide starts from the same list.

What is the RTMP URL for Steam?

There is no single fixed address to copy from a forum post. Steam gives each streaming account its own pair of values on the broadcast upload page:

  • Upload server: the RTMP URL. Steam picks an ingest server close to you based on your IP address when you click Create RTMP Token. In OBS this goes into the Server field.
  • RTMP token: the stream key. It goes into the Stream Key field. Anyone who has it can stream as you, so treat it like a password. You can invalidate it and make a new one on the same page.

Two details catch people out. First, set the Broadcast App ID on that page before you create the token. Valve's troubleshooting note says that if the App ID was missing, you must enter it, regenerate the token and paste the new token into your software. Second, if you move the streaming machine to another location (a different office, a rented server in another country), create a fresh token from that network so Steam picks a nearby upload server.

The account must also be allowed to create a token at all. A limited account, one that has not spent at least 5 USD on the Steam store, cannot. The requirements guide covers that and the other account rules, and the stream key guide shows where the token goes in each tool.

Why does Steam need a 2 second keyframe interval?

A keyframe is a complete picture. Every frame between two keyframes only stores what changed since the last one, so a player can only start showing a stream at a keyframe. Live video platforms generally cut incoming streams into short chunks at keyframes, which is why they want them at a fixed, short spacing. Valve does not document Steam's internals, but it does document the result: a stream without a 2 second keyframe interval fails to start or keeps getting interrupted.

Keyframe spacing: 2 seconds versus encoder default Two timelines over 10 seconds. The top one has a keyframe every 2 seconds, six in total, which Steam accepts. The bottom one has keyframes at 0 and about 8.3 seconds, the x264 default of 250 frames at 30 fps, which Steam rejects. Keyframe interval 2 saccepted Keyframe interval 0 (auto), x264 default 250 framesrejected 0 s2 s4 s6 s8 s10 s 0 s8.3 s
Yellow bars are keyframes. Top: what Steam asks for. Bottom: what you can get by leaving the interval on auto with x264, whose own default is a keyframe every 250 frames, about 8.3 seconds at 30 fps.

Valve's setup guide calls this step important and says that without it the stream will not start. When a stream does start but keeps dropping, the broadcast history page shows the matching error: Make sure your upload key-frame interval is set to 2 seconds and use constant bitrate (CBR). Limit your encoders group of picture (GOP) to at most two times your framerate.

That last sentence gives you the number to type in tools that count in frames instead of seconds:

Frame rateKeyframe interval in secondsGOP size in frames
30 fps260
60 fps2120

In OBS and Streamlabs the field is in seconds, so you type 2. In ffmpeg and some hardware encoders it is in frames, so you type 60 or 120.

What resolution and frame rate should a Steam broadcast use?

Steam asks for a 16:9 picture at 30 or 60 fps, encoded at H.264 level 4.1. That level is the part most guides skip, and it decides which resolution and frame rate pairs are legal. Level 4.1 allows at most 245,760 macroblocks per second. A 1080p frame is 8,160 macroblocks, so level 4.1 tops out at about 30 frames per second at 1080p. A 720p frame is 3,600 macroblocks, so 60 fps fits with room to spare.

We checked this with the x264 encoder (ffmpeg 7.0.2) by encoding 20 seconds of test pattern at each combination with -profile:v high -level:v 4.1, 6000 kbps CBR and a 2 second GOP, then reading the result back with ffprobe:

Resolution and fpsMacroblocks per secondResult at level 4.1
1280x720 at 30108,000Within the level
1280x720 at 60216,000Within the level
1920x1080 at 30244,800Within the level
1920x1080 at 60489,600Over the level. x264 warns MB rate (489600) > level limit (245760) and writes level 4.1 in the header anyway

So 1080p60 "works" in the sense that the encoder produces a file labelled 4.1, but the stream breaks the level it claims. Steam's spec does not say what it does with such a stream. You avoid the question entirely by picking one of these:

  • 1280x720 at 60 fps for fast games where motion matters: action, racing, fighting, rhythm.
  • 1920x1080 at 30 fps for games where detail and text matter more than motion: strategy, card games, management sims, visual novels.

Whatever you pick, keep the canvas and the output at the same 16:9 size. A 1920x1200 or ultrawide capture scaled into the stream adds black bars or stretches the image.

What bitrate should I use for Steam broadcasting?

The ceiling is 7000 kbps of video plus 128 kbps of audio, sent as constant bitrate. You do not have to run at the ceiling, and on most connections you should not.

The reason is in Valve's stats documentation: Steam only starts transcoding, making smaller 720p, 480p and 360p versions of your stream, once an upload session has more than 10 concurrent viewers. Below that, every viewer receives your original stream. A small store page broadcast spends most of its life under 10 viewers, so a 7000 kbps stream goes as-is to the visitor on hotel Wi-Fi, who sees a spinner. That is one of the reasons people report a broadcast "stuck on loading" (more on that in the loading guide).

OutputVideo bitrateTotal with audioUpload speed to have
1280x720 at 303000 kbpsabout 3.1 Mbps5 Mbps or more
1280x720 at 604500 kbpsabout 4.6 Mbps7 Mbps or more
1920x1080 at 306000 kbpsabout 6.1 Mbps9 Mbps or more
Steam maximum7000 kbpsabout 7.1 Mbps11 Mbps or more

The upload column leaves about 50 percent headroom over the stream itself. RTMP runs over TCP, so when the line is saturated the encoder backs up, drops frames, and Steam may close the upload session. If the same connection also carries a game client, a voice call or a cloud backup, leave more.

Upload budget for a 6000 kbps stream on a 10 Mbps line A bar representing 10 Mbps of upload. 6 Mbps is video, 0.128 Mbps is audio, about 3.9 Mbps is spare headroom. A 10 Mbps upload line carrying a 1080p30 stream Video 6000 kbps Headroom about 3.9 Mbps Audio 128 kbps 010 Mbps
Measure your real upload with a speed test from the streaming machine, at the time of day you plan to stream, not the number on your internet contract.

OBS Studio settings for Steam

OBS is the tool Valve uses in its own setup guide. These are the fields to change; leave everything else at its default. For a full walkthrough with scenes and a test run, see how to stream to Steam with OBS.

Where in OBSFieldValue
Settings, StreamServiceCustom...
Settings, StreamServerUpload server from the Steam broadcast page
Settings, StreamStream KeyRTMP token from the Steam broadcast page
Settings, OutputOutput ModeAdvanced
Output, Streaming tabVideo Encoderx264, or your GPU's H.264 encoder (NVENC, AMF, Quick Sync)
Output, Streaming tabRate ControlCBR
Output, Streaming tabBitrate4500 (720p60) or 6000 (1080p30)
Output, Streaming tabKeyframe Interval2 s
Output, Streaming tabProfilehigh
Output, Streaming tabCPU Usage Preset (x264 only)veryfast, or faster if the CPU is spare
Settings, Output, Audio tabAudio Bitrate (track used for streaming)128
Settings, VideoOutput (Scaled) Resolution1280x720 or 1920x1080
Settings, VideoCommon FPS Values60 for 720p, 30 for 1080p

OBS does not show an H.264 level field for x264 in the standard settings. It lets the encoder pick the level from the resolution and frame rate, which is why staying on one of the two recommended pairs matters. If you need to force it, x264 accepts level=4.1 in the x264 Options field.

Which encoder? If the game and OBS run on the same PC, a GPU encoder (NVENC on NVIDIA, AMF on AMD, Quick Sync on Intel) keeps the CPU free for the game. For a pre-recorded video or a dedicated streaming PC, x264 at veryfast gives slightly better quality at the same bitrate. Both produce H.264 that Steam accepts, as long as the keyframe interval is 2 and rate control is CBR.

Streamlabs Desktop settings for Steam

Streamlabs Desktop is built on OBS, so the values are the same and only a few labels differ. Under Settings, Stream, choose a custom streaming server, then paste the Steam upload server as the URL and the RTMP token as the stream key. Under Settings, Output, switch the mode to Advanced and set rate control to CBR, the bitrate as in the table above, keyframe interval to 2 and the profile to high. Set the output resolution and frame rate under Settings, Video.

If you also stream to other platforms through Streamlabs' own multistream feature, the encode is shared, so every destination gets the same settings. Steam's limits (CBR, 2 second keyframes, 7000 kbps) are within what the other large platforms accept, so the Steam-safe values work for all of them. Which of the two apps suits a Steam stream better is compared in OBS vs Streamlabs for Steam.

vMix settings for Steam

vMix needs one change that Valve calls out by name: by default vMix streams with profile Main and level 3.0, and Steam requires High and 4.1. Open the streaming quality settings (the cog next to the quality preset in the stream window). Set the H.264 profile to High and the level to 4.1, and confirm the keyframe interval is 2 seconds and the bitrate mode is constant. Use the custom RTMP destination with Steam's upload server as the URL and the token as the stream name or key.

Settings for other encoders and hosted services

Steam accepts any software that streams over RTMP, so the same spec applies to hardware encoders, cloud production tools and services that stream a video file for you. When you set up any of them, check four things in their settings or ask their support:

  1. Can you enter a custom RTMP URL and stream key?
  2. Can you set the keyframe interval to 2 seconds (or the GOP to 2x the frame rate)?
  3. Does it use constant bitrate, and can you keep it at or under 7000 kbps?
  4. Does it send H.264 High profile and AAC-LC audio at or under 128 kbps?

If a tool cannot do the first two, it will not work reliably with Steam. Valve's guide mentions Restream and LiveU Studio as multistreaming options that support Steam. If you stream a finished video, Loopcast encodes every upload to this spec itself (1080p30, H.264 High 4.1, 2 second keyframes, 6000 kbps CBR, AAC 128 kbps), so there is nothing to set; its Steam video specs page lists the values.

For command-line encoders, these are the flags behind our test encodes. They show how the spec maps onto x264 options; they are not a complete streaming setup:

# 720p60, 4500 kbps CBR, 2 s keyframes, AAC 128 kbps
-c:v libx264 -profile:v high -level:v 4.1 -pix_fmt yuv420p
-b:v 4500k -minrate 4500k -maxrate 4500k -bufsize 4500k
-g 120 -keyint_min 120 -sc_threshold 0
-c:a aac -b:a 128k -ar 48000 -ac 2 -f flv

-g 120 is the 2 second GOP at 60 fps (use 60 at 30 fps). -sc_threshold 0 stops x264 from adding extra keyframes on scene cuts, which keeps the spacing exact. Equal -b:v, -minrate and -maxrate is how x264 approximates CBR. Read back with ffprobe, our 720p60 test file showed profile High, level 41, 60 fps and keyframes at 0.03, 2.03, 4.03 and 6.03 seconds.

How do I check that Steam is happy with my settings?

Steam gives you two places to look while you test with the broadcast set to Friends Only:

  • The broadcast upload page shows statistics for the running stream and any diagnostic error messages, according to Valve's demo streaming guide. Keep it open in a browser tab while you start the encoder.
  • The broadcast history page lists every upload session with its video resolution, start and stop time and any error conditions. Several short upload sessions in a row mean the stream is being interrupted and reconnected. The keyframe and CBR error quoted above appears here.

Run the test for at least 10 minutes. Some problems, such as a connection that cannot hold the bitrate, only show up after the encoder buffer fills. When the history shows one long, clean upload session at the resolution you expect, the encoder side is done. What remains is getting the stream onto the store page, covered step by step in the setup guide.

Questions about Steam broadcast settings

Can I stream to Steam in 1440p or 4K?

No. Steam's spec is H.264 level 4.1 with a maximum of 7000 kbps, which in practice means 1080p at 30 fps at most. Scale higher resolutions down to 1920x1080 or 1280x720 in your encoder.

Does Steam accept HEVC (H.265) or AV1?

No. Valve's spec lists H.264 as the video codec for streams from external software. Pick an H.264 encoder even if your GPU offers HEVC or AV1.

Is VBR allowed if the average stays under 7000 kbps?

Steam asks for constant bitrate. The broadcast history error for broken streams explicitly says to use CBR, so set rate control to CBR rather than VBR or CQP.

What keyframe interval should I use at 60 fps?

Still 2 seconds. In tools that count frames, that is a GOP of 120 at 60 fps and 60 at 30 fps.

Can I use a vertical or 4:3 video?

Steam requires a 16:9 frame. Place a vertical or 4:3 video on a 16:9 canvas with a background, rather than sending it at its own shape.

Sources