steamstreamer
  1. AccountWho may stream
  2. EncoderOBS or another app
  3. RTMP ingestToken and upload server
  4. Store pageApp ID, approval, event

Guides / Demo streams

How to stream a demo on your Steam store page

A demo has its own App ID, so a stream tagged with the demo's App ID does not appear on your full game's store page. To stream demo gameplay there, set the Broadcast App ID to the base game, stream from external software such as OBS with an account that is allowed to play the base game, and make sure that account is not itself playing the demo in its Steam library. Then approve the account for the base game's page, as for any other broadcast.

Why doesn't my demo stream show on the store page?

Because Steam connects a broadcast to a store page by App ID, and your demo's App ID is not your game's App ID. Valve's demo guide says it plainly: a livestream of the demo App ID will not automatically appear on the base game's store page. Demos are separate apps on Steam, found through search, the demo hub and events, and they show as a button on the full game's page. But a stream labelled with the demo stays with the demo.

Three mistakes lead to this, often together:

  • The Broadcast App ID on the upload page is the demo's ID.
  • The stream is sent with the Steam client's built-in broadcasting, which always uses the App ID of the running game, which is the demo.
  • The broadcasting account is the one playing the demo, so Steam replaces your configured App ID with the demo's.

Each is fixed below. If the stream is not on the page for some other reason (approval, Friends Only, a delay), the not showing on the store page guide covers the general causes.

Which App ID should a demo stream use?

The base game's App ID, the number in your full game's store page URL. Valve's instruction is that even though you are streaming demo content, you must tell Steam you are streaming the base game. The general setup guide says the same for every stream: use the App ID of the base game, never of DLC, demos, soundtracks or other secondary apps.

Enter it on the broadcast upload page, logged in as the streaming account, before you create the RTMP token. If you change the App ID after creating the token, regenerate the token and paste the new one into your encoder. Valve's troubleshooting note says a missing App ID keeps the stream off the store page until you do.

Which account can stream demo gameplay to the full game's page?

An account that is allowed to play the base game, not just the demo. Steam's broadcast servers block streams of content the account is not permitted to play, as a safeguard against leaking unreleased content. Since your stream claims to be the base game, the account needs base game access. Valve lists three ways to get it:

How the account gets accessWhen it appliesNotes
Member of your Steamworks partner group with access to the gameReleased or unreleasedUsually the case for your own account; a separate streaming account has to be added
License from a purchase or a product keyReleased games onlyKeys for your own game are requested in Steamworks
Release override licenseUnreleased gamesThe route for a game that only has a Coming Soon page and a demo

The usual account rules apply on top: at least 5 USD spent on the Steam store, and the Broadcast Live permission in your Steamworks partner account or membership of the Store Broadcast Beta group. The requirements guide covers each one with how to check it. Owning the demo is not enough: Valve's list only names access to the base game.

Why can't I use Steam's built-in broadcasting for a demo?

Because the Steam client's built-in broadcasting reports the App ID of the game being played, and when you play the demo, that is the demo App ID. It does not match the base game, so the stream does not appear on the base game's store page. Valve's demo guide concludes that streaming demo gameplay to the store requires third-party streaming software, such as OBS, where the App ID comes from the upload page instead.

This is also why the encoder has to send the stream on behalf of a different account than the one playing. That is the next part.

Can I play the demo on the same account that broadcasts?

No. Valve's guide says not to play the demo with the Steam account you broadcast from. When an account plays a game from its Steam library, the broadcast system learns that game's App ID and prefers it over the Broadcast App ID on the upload page. Your carefully set base game ID is overridden by the demo's the moment the demo starts. Valve's fix is to play the demo on a different Steam account.

Two-account setup for a demo stream A player account is logged in to the Steam client and runs the demo. OBS captures the demo window and sends it to the Steam upload server using the RTMP token of a separate broadcast account, whose Broadcast App ID is the base game and which is not playing anything. The stream appears on the base game's store page. Below, a warning: if the broadcast account plays the demo itself, the library App ID wins and the stream is tagged as the demo. Player account Broadcast account OBS on the streaming PC Steam: base game store page Wrong: broadcast account plays the demo Logged in to the Steamclient, runs the demo(demo App ID) Not playing anythingApp ID = base gameProvides the RTMP token Captures the demo window, streams with the broadcast token Stream counted as the base game, shown on its page Library reports the demo App ID, which overrides the base game ID on the upload page. Stream is tagged as the demo and does not reach the base game's page. demo windowserver and tokenRTMP
The game picture comes from one account and the broadcast identity from another. They can be on the same PC: Steam only needs the broadcast account to stay out of the library while the stream runs.

What setups work for streaming a demo?

Three setups follow Valve's rule, and they differ in how many machines you need and whether the gameplay is live. In all three, the broadcast account only supplies the token and the App ID; it never runs the demo.

SetupHow it worksGood forWatch out for
One PC, second account in the clientLog the Steam client in as a player account and run the demo. OBS on the same PC captures the window and streams with the broadcast account's token.A single developer machine; live play with commentaryDo not log the broadcast account in to a Steam client anywhere else and launch a game
Two PCsA play PC runs the demo under any account. The streaming PC captures it (capture card or network source) and runs OBS with the broadcast token.Keeping encoding load off the game; streaming from an office machineMore hardware; the capture path has to deliver a 16:9 picture
Pre-recorded demo footageRecord a demo playthrough, then stream the video file from OBS or a hosted service such as Loopcast with the broadcast token.Streams nobody has to play liveNo live interaction; label footage that was live before as a replay

On the one PC setup, the player account's own Steam client broadcasting is a separate feature from your OBS stream. Developers report the client's broadcast settings interfering with an OBS stream, so we turn the player account's client broadcasting off for these sessions (our practice, not a documented requirement).

Valve's FAQ explicitly allows pre-recorded broadcasts. The labelling rule in the FAQ is about re-broadcasting a stream that was live before. For a fresh recording, saying in the title or an overlay that it is recorded is our recommendation, not a rule.

How do I set up a demo stream step by step?

This is the order Valve's demo guide follows, with the general setup steps folded in.

  1. Prepare the broadcast account Make sure it has spent at least 5 USD on the Steam store, has access to the base game (partner group, license or release override license), and has the Broadcast Live permission or Store Broadcast Beta membership.
  2. Set the base game App ID Log in to the upload page as the broadcast account and enter the base game's App ID in the Broadcast App ID field, not the demo's.
  3. Create the RTMP token Click Create RTMP Token and copy the upload server and the token. If you set the App ID after an older token, regenerate it.
  4. Start the demo on another account Launch the demo from a Steam client logged in as the player account, on this PC or another one, or prepare the recorded demo video.
  5. Configure OBS Add a Game Capture source in Capture Specific Window mode pointed at the demo. In Settings, Stream, choose a custom server and paste the upload server and token. In Settings, Output, choose Advanced and set the keyframe interval to 2. The OBS to Steam guide has every field.
  6. Test with Friends Only Start streaming and open the upload page as the broadcast account. It shows statistics for the running stream, any diagnostic error messages and a link to the stream on Steam Community.
  7. Approve the account for the base game Add the broadcast account to a Live-Stream/Broadcast event on the base game, or to the base game's Special Settings whitelist, as described below.
  8. Switch to Public and check the full game's page Set the permission to Public, wait up to 5 minutes and refresh the base game's store page.

How do I approve a demo stream for the full game's page?

The same way as any broadcast, on the base game, not on the demo. Valve's demo guide refers back to the normal approval: either a Steam event or the store page's Special Settings.

  • Event: on the base game's app landing page, create a Live-Stream/Broadcast event, enable broadcasting on its Broadcasting tab and add the broadcast account. The account creating the event and the broadcast account must be Steam friends. The stream may run until 24 hours after the event ends. This is the preferred method.
  • Special Settings: Edit Store Page for the base game, Special Settings tab, Steam Broadcast (Beta) section. The account stays approved until you remove it and re-publish the store page.

Approving the account on the demo's own store page does not put the stream on the full game's page, because the stream is tagged with the base game's App ID. The full setup guide compares the two approval methods in detail.

How do I check the demo stream reached the full game's page?

Load the base game's store page logged out, about 5 minutes after going Public, and refresh: the live player should be there. If it is not, check these in order:

  1. Upload page, as the broadcast account: the Broadcast App ID still shows the base game, and there are no diagnostic warnings. Developers report a warning there when the streaming account is playing another App ID in its library; if you see one, the broadcast account is running something.
  2. Broadcast history at steamcommunity.com/broadcast/history: the session should show the base game's capsule. A missing capsule means no App ID was set for that session.
  3. Approval: the account is on the base game's event or whitelist, and the event is published and in its time window.
  4. Permission: Public, not Friends Only.

Once everything matches, the stream behaves like any other broadcast on the page: chat, moderators and viewer stats work the same.

Questions about streaming a demo to Steam

Can I stream my demo to the demo's own store page instead?

Valve's demo guide only covers streaming to the full game's page, and its general setup guide says to use the base game's App ID, not a demo's. Streaming under the demo App ID is not a documented route to any store page.

Do I need two Steam accounts to stream a demo?

For live gameplay, yes: Valve says not to play the demo on the broadcasting account and to use a different account to play it. If you stream a pre-recorded video instead, only the broadcast account is needed.

Can I use Steam's built-in broadcasting to stream my demo?

No. The client uses the demo's App ID, which does not match the base game, so the stream does not reach the full game's page. Use OBS or other RTMP software, or a hosted service such as Loopcast that streams a recorded demo video under the base game's App ID.

My game is unreleased. Can the broadcast account still stream the demo?

Yes, if the base game has a Coming Soon page and the account has access to it, for example through your partner group or a release override license.

Sources